Summit Engineers

Heating and Drying Systems

  • Direct Heaters
  • Indirect Heaters
  • Suction and Exhaust System

Direct Heaters

  • In direct heating the convection heat process is used to heat the material.
  • The chamber has high temperature insulation to avoid heat getting dissipated outside the chamber.
  • Perforated heat directors are used for convection heat control.
  • Features:
  • Robust construction
  • High strength
  • Corrosion resistance
  • Specifications
Dimensions 2m x 1.5m x 0.5m(LxWxH)
Power Up to 12 kw
Maximum temp 1500C
Heat Directors Optional
Heat Recirculating
Insulation Dual Panel Glass wool
Power 220VAC or 480VAC, 3 phase

Indirect Heaters

  • In indirect heating the convection heat process is used to heat the material.
  • The chamber is made of high thermal conductive materials to transfer as much as heat possible inside the chamber.
  • Perforated heat directors are used for convection heat control.
  • Features:
  1. high temperature blower motor and high-volume recirculation for heat transfer
  2. Robust construction
  3. High strength
  4. Corrosion resistance
  • Specifications
Dimensions 2m x 1.5m x 0.5m( LxWxH )
Power Up to 12 kw
Maximum temp 1500C
Heat Directors Optional
Heat Recirculating
Insulation Dual Panel Glass wool
Power 220VAC or 480VAC, 3 phase

Suction and Exhaust System

  • Paint booth ventilation design is important to create a safe environment for continuous duty use.
  • Summit incorporates the exhaust system in each machine with easy connection with your exhaust ducting’s.
  • The overspray is filtered and then brought out of machine so that it can connected to factory ventilation system.
  • Features:
  1. Robust construction
  2. High strength
  3. Corrosion resistance
  • An electrically automated blower is used to perform suction of air which get reed of constant accumulation of overspray’s in the spraying zone.
  • Wide variety of Material, impeller material combinations available to suite your paints requirement.
  • Specifications:
Speed 1400-3000 r/min
Motor 0.5 to 4 Kw-p