summit.engr@summitengineers.net

Automated Finishing System

Automated Deflashing Machine:

Flash is the excess rubber material left on a rubber part or component after molding. Flash is the result of the rubber material or compound migrating through the mold surface finish and mating surfaces. It can be removed by tear trimming, cryogenic deflashing, tumbling, and other post molding operations. It is a common feature that every metal to rubber component has flash after molding. And it is labors, accident prone to the operator and time consuming activity. Summit has developed special machines for ID/OD cleaning by taking in to considerations your required volumes!


ID Deflashing Machine:

Two station pneumatically operated system.

Cleans ID thoroughly.

Quick and effective operation.

Quick changing fixtures to accommodate different components

Adjustable stroke depending upon length of the job.

Adjustable cleaning stroke depending upon inside flash thickness.

Can accommodate job from diameter 10 mm to 100 mm.

Cycle Time < 5 sec.


Two Station Face Deflashing Machine:

First station for deflashing of inner face and Second station for deflashing of outer face.

Highly dynamic indexing table for quick loading, consisting of 6 nos of job holding fixtures.

Quick changing fixtures to accommodate different sizes of components.

Simultaneous fast and effective deflashing of inner face and outer face.

Effective flash extraction.

Cycle Time < 5 sec.


OD Deflashing Machine:

Flash removal from outer of the bushings.

Multiple numbers of components can be cleaned at a time.(Max. cleaning length-450mm)

Accommodates variety of components from diameter 10 mm to 100 mm by changing rods.

Rod acts as gauge for ID bush.

Cross slide with one grinding spindle.

Localized and effective flash extraction canopy.

Cycle time- Approx @ 20 sec for 450 mm length.


Flash Cutting Machine:

Simple, compact single station system to cut the extra flash from components outer face.

Quick operation for flash removal.

Quick changing fixtures to accommodate different components.

Can accommodate job from diameter 10 mm to 100 mm.

Cycle Time < 5 sec.


Swaging Machine:

Particularly for the rubber-metal bonded bushes it is necessary to enhance the strength by pre-stressing, which is called swaging .Summit have developed hydraulic operated Swaging Machine to accommodate bushes up to diameter 75 mm.


Automation for Grinding line to achieve required Diameter of the Bushes:

We support you with variety of feeding conveyors namely Loading, Intermediate and Accumulation in between your centre less grinding machines. This will eliminate manual intervention for loading of the component on to the grinding machine, thereby reducing the accidental hazards to the operators. It is possible to incorporate automatic gauging and inspection system in line with accumulation conveyor.


Automatic Retapping and Plug Passing Machine:

During moulding rubber flash occupies the threads of components having internal threads. It then becomes very tedious to remove the flash. These machines basically perform de-flashing by controlled re-tapping Operator dependency is removed and consistency in the required quality is achieved with these machines.


Contact us

Summit Engineers And Consultants Pvt. Ltd.

F- 93, MIDC, Ambad , Nashik - 422010,

Maharashtra, India

+91-8087074417

+91-8237007190

+91-253-6640562 / 72 / 74

© Copyright 2016 Summit Engineers and Consultant Pvt. Ltd. All right reserved.

Design and Developed by Xposure Techmedia Pvt. Ltd.